Bullet Technology And Ballistic Innovation With Lehigh Defense

Gun News
Bullet Technology And Ballistic Innovation With Lehigh Defense

A look at Lehigh Defense and its attempts to perfect the art of bullet technology and ballistic innovation.

Sometimes, it’s necessary to have the backstory to appreciate a product. I think that’s especially true with Lehigh Defense … where bullet evolution seems to be happing faster than anywhere else. Under the watchful eye of Bill Wilson—yes, the Bill Wilson of Wilson Combat—Lehigh Defense is taking the mono-metal bullet to places it’s never been.

But I’m getting ahead of myself. For me, this story starts in West Virginia, with two hillbillies trying to create a bullet for a .50-caliber short-action rifle cartridge.

France To West Virginia

In 2006, I was approached by fellow West Virginian, Mike Cyrus. Cyrus had designed a short-action .50-caliber rifle cartridge capable of launching a 345-grain bullet at 2,700 fps. His problem was that there were no .50-caliber bullets capable of withstanding impact velocities that high. I showed Cyrus the French designed GPA bullet and detailed my experiences with it. I felt that if Cyrus could create a similar bullet, it would be ideal for his cartridge.

Cyrus-50-cal
Cyrus’ short action .50-caliber rifle cartridge that he and Lehigh Defense developed a bullet for. (Shown next to a .22 LR cartridge.)

The GPA bullet is a mono-metal bullet with a broached hollow point. When it impacts animals, fluids are forced into the hollow point. This causes the bullet to fracture, and the result is the separation of four petals. Sometimes the petals will break from a Barnes Triple Shock mono-metal bullet, but when this happens, much like they did with the old Winchester Fail Safe bullet, the petals just fall away and are left in the bullet’s path. Because the fracturing on the GPA bullet occurs almost immediately, the petals retain velocity and drive forward and outward from the path of the bullet shank. This creates massive tissue destruction and hemorrhaging.

You Might Like

Cyrus liked the idea, and, working with Lehigh Defense, they created a bullet. It wasn’t long until Cyrus was back at my range to test it … and the results were amazing. The bullet delivered a controlled dispersion of shrapnel that left a wound cavity of immense proportions. The break-away petals created their own wound tracks and the base of the bullet drove incredibly deep. Cyrus worked with Lehigh to tweak the design and I took Cyrus’ .50-caliber cartridge and those bullets to Africa, where they impressed the hell out of a professional hunter.

Cyrus soon went to work for Lehigh Defense to develop other bullets, conduct testing and to produce load data. He became an integral part of company and moved to South Dakota in 2017 when the company relocated. That year Cyrus also came to Africa with me, and we tested multiple Lehigh bullets on a variety of critters. My son even used a 270-grain .375-caliber version of the Controlled Fracturing bullet that had evolved from Cyrus’ early work to take an African buffalo.

buffalo-hunt-375-Ruger
This African buffalo was taken at 100 yards with a .375 Ruger using a 270-grain Controlled Fracturing bullet from Lehigh Defense.

Enter Wilson Combat

Lehigh Defense makes a lot of unique mono-metal bullets, and we’ll get to them shortly. But it was Lehigh Defense’s Controlled Chaos bullet that caught Bill Wilson’s attention.

In late 2021, Wilson Combat purchased Lehigh Defense. Wilson felt solid copper bullets would be the future and that Lehigh Defense was on the forefront of that technology. An avid hunter, he has probably killed more feral hogs than anyone I know, and he was impressed with the Controlled Chaos’ radical terminal performance. He also felt that the Lehigh’s Xtreme Defense bullet was changing how many people think about self-defense handgun projectiles. Wilson relocated Lehigh Defense to Clarksville, Texas, not too far from his home.

Lehigh-Defense-rifle-ammo

And this is where the circle completes. Cyrus was lost in this shuffle, but it wasn’t long until he and Wilson connected, and Wilson learned the value that Cyrus had brought to Lehigh Defense before the sale. Wilson brought Cyrus back to Lehigh Defense to assist with bullet testing, load development and, just as importantly, to handle customer questions and technical support. But what’s also interesting is how bullet development at Lehigh Defense works.

Responsive Engineering

Because of how Lehigh Defense bullets are machined, they can do very small runs and test them; a bullet can be tweaked and tested multiple times in a day. Wilson can take a new design and shoot some feral hogs in the morning, report his findings and the bullet can be modified before the day is over. The final product is not just a result of just testing in various mediums, it’s thoroughly vetted on wild game.

bear-hunt-375-Ruger
A 270-grain Lehigh Defense Controlled Fracturing bullet out of a .375 Ruger was used to take this massive black bear on Vancouver Island.

Cyrus is embedded in this process. He shadows Wilson’s work and is in constant contact with the factory to make suggestions based on what he sees on paper, on the chronograph and during terminal performance testing. Cyrus was recently on my range showing me the subsonic and supersonic bullets they’ve been developing for the new 8.6 Blackout cartridge. Before he left, he was on the phone with Clarksville, tweaking things.

During that visit, Cyrus also showed me their new Tipped Controlled Chaos bullet. With its better ballistic coefficient, it retains energy better and delivers flatter trajectories. Like the 8.6 Blackout bullets, it’s still under development but should be available in 2024.

Smart Bullets Getting Smarter

This story is slanted a bit to highlight the work and contributions of a fellow hillbilly and friend, but Cyrus and his work with Lehigh Defense has been my main window into the company. Today, Wilson is adding to the Lehigh Defense story and, according to Cyrus, since acquisition, Wilson has substantially enhanced the performance of several of the bullets Lehigh Defense offers.

30-cal-Maximum-Expansion-bullet-Lehigh-Defense
A 125-grain, .30-caliber Maximum Expansion bullet fired from the .300 HAMR cartridge.

Of course, I cannot just end it here. You need to have an idea of the totality of Lehigh Defense’s smart-bullet product line. So, here’s a rundown of some of their best bullets, available as components or in loaded ammunition from Lehigh Defense, Wilson Combat and several other ammunition manufacturers. I’d suggest you give some of them a try.

Controlled & Xtreme Controlled Chaos Bullet

This is an all-copper mono-metal bullet designed to fracture during penetration. The fractured copper shrapnel is then propelled outward and forward from the bullet path. The base or shank of the bullet remains at bullet diameter and penetrates extremely deep, most often exiting. A version of this bullet built with softer copper is called the Xtreme Chaos and it works the same, but the nose of the bullet shank slightly deforms to create a larger diameter penetrating hole.

controlled-chaos-bullet-LD
The Controlled Chaos bullet and the wound-enhancing shrapnel it creates almost instantly after impact.

Tipped Chaos Bullet

This is nothing more than an all-copper mono-metal bullet designed to fracture during penetration, just like the Controlled Chaos. The difference, however, is the polymer tip that’s inserted into the bullet’s hollow point cavity. This tip increases the bullet’s BC, helps with retained energy down range and flattens trajectory.

tipped-controlled-chaos-bullet-LD
Tipped Controlled Chaos bullet. Notice the shrapnel that breaks away to form additional wound tracks, leaving the base/shank of the bullet to penetrate.

Controlled Fracturing Bullet

This is a more controlled version of the Controlled Chaos bullet. The difference is that the shrapnel is reduced to large petals that do not bend or break part. The petals separate soon after penetration and radiate outward from the main bullet path, creating havoc and destruction in their wake. Where this bullet is most applicable is with subsonic loads. No other bullet from any manufacture can match it in terms of subsonic terminal performance. It’s ideal for cartridges like the .300 and 8.6 Blackout.

Controlled-Fracturing-bullet-LD
This version of the Controlled Fracturing bullet is designed for subsonic application and will upset at extremely slow velocities.

Maximum Expansion Bullet

This is a deviation of the Controlled Fracturing bullet, and similar to the Extreme Chaos bullet it’s built from slightly softer copper. This allows the petals on the bullet to remain attached similar to the Barnes Triple Shock. This bullet creates massive tissue destruction but with less penetration than the Controlled Fracturing bullet. It’s suitable for handgun and subsonic applications, and Wilson is working to develop tipped versions for high velocity rifle cartridges.

Lehigh-Defense-maximum-expansion-9mm
This is a 118-grain 9mm version of the Lehigh Defense’s Maximum Expansion bullet.

Xtreme Defense Bullet

This is an all-copper, non-deforming approach to a self-defense bullet designed to deliver penetration between the FBI’s optimum 12- and 18-inch range. A non-deforming/expanding bullet might seem counter to conventional wisdom, but the concept is valid. This is partly because the lack of bullet upset prevents the potential for penetration interference from intermediate barriers and partly because, due to the large flutes near the bullet’s nose, wounding is enhanced through high-velocity fluid transfer.

Underwood-Ammo-45-GAP-Xtreme-Defender
Underwood loads Xtreme Defense bullets for many handgun cartridges. Those deep flutes use hydraulic fluid transfer to damage tissue.

Xtreme Penetrator Bullet

An alteration of the Xtreme Defense bullet, these bullets are designed to drive deeper. They’re suitable for both handgun and rifle cartridges and are heavier than comparable Extreme Defense bullets in the same caliber. They also have smaller flutes to help maximize penetration, and the X-shaped nose design will punch through as opposed to skid on bone. These bullets create much more damage than conventional round nose bullets.

underwood-ammo-400-cor-bon
Underwood ammo offers ammunition loaded with Lehigh Defense Xtreme Penetrator bullets for many cartridges. Notice the wide X flat point in the bullet’s nose.

Wide Flat Nose

Very similar to a hard cast bullet, the advantage of a solid copper flat nose solid is that the bullet’s nose will not deform, chip or break, and this contributes to the bullet’s ability to penetrate very deep and straight. Buffalo Bore loads these Wide Flat Nose bullets in their Dangerous Game line. I watched a hunter in Africa absolutely hammer a buffalo with one from a .45-70, and one was all it took.

buffalo-bore-wide-flat-nose-45-70
Buffalo Bore loads Lehigh Defense Wide Flat Nose bullets for a variety of dangerous game cartridges.

Editor’s Note: This article originally appeared in the February 2024 issue of Gun Digest the Magazine.


Raise Your Ammo IQ:

44-Targetposters-pack-GD-reduced-300

Next Step: Get your FREE Printable Target Pack

Enhance your shooting precision with our 62 MOA Targets, perfect for rifles and handguns. Crafted in collaboration with Storm Tactical for accuracy and versatility.

Subscribe to the Gun Digest email newsletter and get your downloadable target pack sent straight to your inbox. Stay updated with the latest firearms info in the industry.

You Might Like

Articles You May Like

Prop KK could fund victim services through gun tax
Beyoncé and Harris, Heston and Reagan, Sinatra and JFK … the stars who support US presidential candidates
The musicians rejecting Donald Trump’s election campaign – from Taylor Swift to Bruce Springsteen
Donald Trump vs Elon Musk: Here’s how their political views compare on everything from guns to abortion
Mothers of the Disappeared in Vavuniya Rally U.S. Tamils to Support Kamala Harris for Justice and Tamil Sovereignty

Leave a Reply

Your email address will not be published. Required fields are marked *