The Sig P226 is BA. No doubt about it. That’s probably why you got one, or are in the market for one. This pistol is a full size 9mm handgun known for its dependability and accuracy. What are the best Sig P226 holster options? Like every other firearm, you can find a variety of holsters to fit the way you want to carry your Sig.
Best Sig P226 Holster – Quick Pick
I have done some research for you and would like to share what I found. My top pick in holsters for the Sig P226 is the Blackhawk SERPA Concealment Holster.
Blackhawk SERPA Concealment Holster for Sig P226
This Blackhawk holster is a great level two retention holster. It allows for easy draw and re-holster, without slowing you down. Blackhawk is a name you can trust in holsters.
Get Great Guns and Ammo Deals!
More About Sig P226
The Sig P226 is a unique line of handguns. There are twenty five different models. They are chambered in 9mm, .40 S&W, and 357 SIG. There are no external safeties and the exposed hammer can be decocked.
History of Sig Sauer
The company was founded to make wagons. After seven years of wagon making, they won a contract with the Swiss government to make 30,000 muzzle loading Prelaz-Burnand rifles. They changed their name to Swiss Industrial Company.
Then in the 1970’s they merged with another German company, Sauer and Sohn. They kept the original name of Sig Arms until 2007, when they changed it to Sig Sauer.
“In 1853, Friedrich Peyer im Hof, Heinrich Moser and Conrad Neher began what they thought would become a successful wagon factory above Rhine Falls in Switzerland. Little did they know then, that their company would become one of the world’s most renowned manufacturers of small arms.”- Sig Sauer Corporate History
How Did The P226 Come To Be?
In the 1980’s the military was looking for a new pistol to replace the M1911A1 handguns that had been used since WWl. During this time NATO was standardizing to the 9mm and the powers that were in place, at the time, decided they needed a new gun for the new soldiers.
Sig Sauer wanted to get in on some US government contracts so they redesigned the P220, which they had designed for the German military.
The Beretta 92FS was chosen for the military, but Navy SEALs and police departments around the country went with the Sig P226.
Choosing A Holster for the Sig Sauer P226
Choosing a holster is a personal decision that takes different things into consideration. Things to consider are body type, level of training or experience, and the intended use of the holster. There are a few things that virtually all holsters should do.
Primary Feature
1. Covered Trigger Guard
A covered trigger guard prevents things (including a finger) from entering the trigger area and causing an accidental discharge.
2. Grip Accessibility
You should be able to get a full grip on the handgun while it is in the holster. This enables a quick, smooth draw without fumbling around with grip adjustments.
3. Adequate Retention
The holster must retain the handgun for the activity level of the wearer. Some activities may need more retention. For example, a police officer needs more retention than someone who has a concealed carry permit and sits in a car most of the time.
4. One Handed Draw
Being able to draw with one hand may be critical for situations where your other hand may be occupied. On the other hand, if concealment is necessary you will need a hand to move clothing, etc.
What Will You Wear With Your Sig P226?
Every holster type is a compromise and what works for one situation may not work for another. There are different types of holsters for different circumstances. Think of it like shoes.
You wouldn’t wear the same pair of shoes to the gym that you wear to the office. Therefore, it is best to have several holster types so you can be prepared to carry in all circumstances.
Gun Belts
A good, strong gun belt is a foundational part of carrying on your hip. Trying to carry a gun, holster, and extra ammo on a regular department store belt will lead to dissatisfaction with the holster.
While a good department store belt will hold your pants up, it will not be able to bear the weight of a gun all day.
Other Wardrobe Thoughts
There are some other wardrobe issues you may want to keep in mind for other carrying options.
1. Shoulder – You will need a jacket to conceal a shoulder harness
2. Pocket – You will need pants with deep enough pockets to hold your holster and gun
3. Ankle – You need pants loose enough to fit your holster under the pant leg
4. IWB – Your waistband will need to be one to two inches larger than you normally wear
Sig P226 Holster Material Considerations
Another thing to keep in mind, when choosing a holster, is the material it is made of. Holsters are made of leather, kydex, hybrid leather and kydex, and nylon. Once again, there will be compromises for each material.
Leather is soft and forms to your body, but kydex is strong and is precision molded for your gun. Hybrid holsters seem to strike a nice balance between the two. They are usually made with a leather part that fits up against your body nicely and a kydex pocket for your gun to sit in.
Top Picks for Sig P226 Holster
Let’s talk about the top picks I found for you. Once again, keep in mind what you will be usinf your holster for as we look through these choices.
1. Blackhawk SERPA P226 Concealed Carry Holster
My top pick is the Blackhawk. This holster features a speed cut design allowing for speed when drawing or re-holstering. Their patented SERPA auto lock release is automatically positioned to facilitate a correct drawing motion.
Blackhawk SERPA P226 Concealed Carry Holster – Features
- SERPA auto lock system
- Audible click upon re-holstering for safety
- Includes belt loop and paddle platform
- Level two retention
| Pros | Cons |
|---|---|
| Excellent retention | Paddle isn’t good for skinny people |
| Trigger is covered well | Uncomfortable while sitting |
| Adjustable cant | Paddle breaks and needs replacement |
| Finger placement for release is excellent |
2. SigTac P226 Paddle Retention Holster
This holster is durable and comfortable. It uses a unique patented release system. It rotates 360 degrees for every possible application.
SigTac P226 Paddle Retention Holster – Features
- Fits P226 with accessory rail (or without)
- Protective sight channel
- Rotates 360 degrees
| Pros | Cons |
|---|---|
| Ideal for full size carry | Right handed only |
| Easy release | Bulky for concealed carry |
| Audible click with re-holstering | Slight wiggle |
| Comfortable | |
| Made well |
3. Galco Triton IWB P226 Holster
This holster is made from durable kydex. It works good to conceal a full size pistol. It fits belts up to 1 ¾ inches.
Galco Triton IWB Sig Sauer P226 Holster Features
- Sweat Guard
- Fits belts up to 1 ¾ inches
- Smooth draw
| Pros | Cons |
|---|---|
| Rides close to body | Clip feels spongy |
| Draws well | Tight fit |
| Easy to use | Bulky |
4. Galco Combat Master Belt Holster for Sig-Sauer P226
This holster is designed for fast draw and presentation with secure retention. The butt forward cant offers concealment even for large guns.
Galco Combat Master Belt Holster for Sig-Sauer P226 – Features
- Made from premium saddle leather
- Double stitched seams
- Hand molded fit
- Fits belts up to 1 ¾ inch
| Pros | Cons |
|---|---|
| Quality workmanship | Very tight at first |
| Comfortable | Break in period needed |
| Gun sits close to body | |
| Excellent for concealed carry |
5. Galco Concealable Belt Holster for Sig-Sauer P226
This holster is constructed with a two piece design that contours with the body. This allows for more comfort and a narrower profile than a regular pancake holster.
Galco Concealed Carry Belt Holster for Sig-Sauer P226 – Features
- Hand molded
- Combat grip accessibility
- Double stitched seams
- Covers the trigger guard
| Pros | Cons |
|---|---|
| High quality product | Substantial break in period |
| Good retention | May wear the finish of the gun |
| Fits perfectly | |
| Right and left handed models |
What if My Sig P226 Has a Light?
If you are looking for a holster for a Sig P226 with light? We did find one that seems to work for a lot of folks. But we have not tried this holster personally.
Orpaz Light Bearing Holster for a Sig P226 with Light
This Sig P226 holster will fit rail mounted lights such as the Streamlight TLR-2 and SureFire X400 𝗼𝗿 𝗮𝗻𝘆 𝗼𝘁𝗵𝗲𝗿 𝗹𝗶𝗴𝗵𝘁 𝘄𝗶𝘁𝗵 𝗹𝗮𝘀𝗲𝗿 𝘁𝗵𝗮𝘁 𝗶𝘀 𝘄𝗶𝗱𝗲 𝗳𝗿𝗼𝗺 𝟭.𝟮𝟮”” 𝘁𝗼 𝟭.𝟰𝟳””.
Also includes LEVEL 𝗜𝗜 RETENTION. Plus an ergonomically positioned thumb lock & release mechanism, and magnetic retention mechanism for optimal security
Sig P226 Holster Options – Conclusion
While there are quite a few holsters to choose from, the Blackhawk SERPA outshines the others. Blackhawk is a reputable company and they deliver a great product.
This holster allows for smooth draw and easy re-holster, with its speed cut design. It’s positioned for a correct drawing motion. They really made a great level two retention holster with this one.
For a good price, you’ll get a great holster if you choose the Blackhawk SERPA. You’ll get one made for carrying the Sig P226 and if you carry this on the range or on the job, it will give you years of service.
I hope you found some useful information in this review. The journey to finding a good holster is an important one but it doesn’t have to be traveled alone.
Recommended Reading